Linking to A WiFi Community With XCTU
Open XCTU. It must create on the “PC options” case. On there, choose their XBee Explorer’s COM slot and make sure the slot setup become because below (9600 8-N-1). 1st, create the COM slot and make sure the options were appropriate.
Struck Test/Query to make sure you can correspond with your XBee Wi-fi. You ought to get a response like: This is a good indication! Means we are chatting with the XBee.
Mouse click up to the “Modem setting” tab. And then click “Read” to show your XBee Wi-fi’s stored settings. A view with the XBee WiFi’s default variables.
Choose “effective Scan” around the top of the scrolling windows. Then click on the “Scan” button** that appears. This will open up the circle browse electricity.
Click on the “Scan” option at the end of scan windows. If all happens better, the community should appear above. The “website link Margin” benefits represents the effectiveness of the transmission (larger is most effective). And “Security” advantages indicates the encoding function of community. Select their community’s SSID, submit a passkey if required, and click “Select AP”.
Choose the system. If it is encoded, submit your protection trick. Next click “pick AP” (maybe not “Done”!). XCTU will configure the XBee, and it surely will attempt lease a DHCP address in case your community is initiated for this.
After successfully hooking up, click “Review” near the top of the windows again. This may revise all of the XBee’s configurations, such as GW (the gateway IP), MK (the subnet mask), and our (the component’s assigned internet protocol address). If these values all add up, subsequently congratulations, your XBee is actually connected with your own WiFi system! The XBee Wi-fi component’s IP address is actually 192.168.0.101.
Yay! What today? There are some directions you’ll be able to get:
Chatting with Other XBees
If you’ve ever made use of XBees before, it is likely you think about them as easy-to-setup cordless transceivers. Two XBees, set up correctly, can effortlessly move information to each other from just one serial port to some other. XBee WiFi’s are no various!
Appropriate that same set of steps, you can developed a moment XBee WiFi module to in addition connect to the wireless network. It is going to get exclusive IP address (usually designated via DHCP). Observe that.
To setup two XBees to speak to one another, you’ll need to customize the DL — resort ip — of each to the other XBee. You’ll be able to start a second XCTU window, or arrange each of them at the same time.
Then you can click over to the Terminal loss to write characters and also them sent from the computer system, through one XBee, to the different XBee and over to the second terminal.
Another elective program for those modules is to try using them in the cloud. Digi’s Device affect service renders this very easy. Click to another page to see an example create.
To the Cloud!
XBee Wi-fi’s are made to enable straightforward communications with tool Cloud by Etherios (TM). The Device affect provider allows you to interface your own XBee WiFi with all the online, where you are able to control the I/O pins and read the status from cozy constraints of internet browser (around the globe!).
Today, equipment affect try a made provider, but it’s rather affordable (down seriously to $0.50 per device every month). In addition they provide a no cost thirty day test any time you simply want to give it a try, which is that which we’ll perform here.
Setting up Device Cloud
Here you official site can view and controls just about everything whilst relates to the XBee. You’ll be able to ready pins course and value inside the insight and Output configurations case. Take to place a pin to “Output High”, after that click rescue . The pins must have started powered to 3.3V, but how do you know? Time for you to whip a circuit along!
Grab A Circuit System Split!
Listed here is the circuit we’ll use to get the maximum benefit of XBee’s instance cloud dash. You don’t need to get together every part, but we recommend at the least trying the LED attached to pin 13.
You will nonetheless have to force the XBee Wi-fi module. It would possibly remain in the XBee Explorer, or you can plug it into an independent XBee Breakout Board. Discover a graphic your hookup using:
Since we have connected some keys and LEDs, you need to go on it towards affect!
Creating XBee Dash
Mess around with-it! Shot turning the Light-emitting Diode on from another location. Next browse some buttons and potentiometers. Quite cool! Now query a buddy from over the ocean to do it. Actually cooler!
If you would like establish out your very own application, all of the necessary laws try viewable by clicking the option on a widget. It appears like every little thing’s hosted on Digi’s GitHub web page, which we are huge enthusiasts of.
Budget and Heading Furthermore
Now that you’ve taken the XBee with the affect, just what nifty Internet-of-Things app might you make? If you want any assistance, or this guide didn’t respond to all of your current question, think about checking out these resources too: